Were! I may be interested, Im looking for a daily so that i can begin body work on my Triumph
v8_mopar,
May 5, 5:48pm
They all over the place. sold one on hold with no wof, tidy as, $100.
What trumpy you working on ginga
v8_mopar,
May 5, 5:50pm
Theres one around the road for $500. New wof and all.
ginga4lyfe,
May 5, 7:09pm
Just my mk2 1977 2500tc( only door rust and very minor screen rust but all will be told when im taking the paint off! ), Ill have to look around for one then! I do like those old fairmonts
ginga4lyfe,
May 5, 7:11pm
OHHH and i see why you can get them soo cheap, ur in CHCH im all the ways in auckland, and i cant be bothered with the long drive and expencive ferry for a 500 buck car! !
v8_mopar,
May 5, 7:23pm
If ya need trumpy parts I have a shed full but I just scraped all doors boots and bonnets(nun with rust but had to go). Most other parts there. They have to go so cheap as and will be runing big parts auctions over the next week or two
ginga4lyfe,
May 5, 7:27pm
I may be interested if you have a spare 2500 engine and j type box! My engine has just had its head been rebuilt, and runs fine now, but a spare would be great!and a j type box as mine is really noisy untill 4th gear ( sounds like straight cuts, but isnt haha ), otherwise, I dont need many or. any parts for the time being
jay.da,
May 5, 7:32pm
I'll be keen for some parts too, If they're the right price.
v8_mopar,
May 5, 7:36pm
Got a mint 2.5 engine. All painted in black with metal gray rocker cover and ready to go. Drove it for 6 months so know its in great condition.
Last one cost $120 to send to Auckland on a pallet.
No boxes tho, they go fast!
Also got a mint 1978 coming up forsale. Real mint! just ticked over 100,000k's
ginga4lyfe,
May 5, 7:36pm
its a bit sad that you got rid of non rusty doors though, though. I do only have 1 rusty door, the drivers door, the rest is surface and around the rear screen ( easy to pull out and re install)
v8_mopar,
May 5, 7:38pm
All got to go so will be near giving bits away
ginga4lyfe,
May 5, 7:38pm
only 120 to send! sheesh, main freight wanted to charge me 300 for shipping! and I nearly bought a GT6 engine for 200 bucks but the shipping put me off!, so what would you like for the engine and ill have a think about it!
v8_mopar,
May 5, 7:40pm
True. I had been sending lots of doors up your way with people happy to pay $180 per door posted. Just run out of time so its the quick move of parts now.
v8_mopar,
May 5, 7:47pm
Motoring members $200 which is $400 less than the last one I sold. All other parts $10 to $20 even if you after lots of bits it not for each. Whole boxes for that price. Wood paneling, great rotas, o/d drive shaft, radiators, spring hand holders in great order etc
ginga4lyfe,
May 5, 7:54pm
Nice, I may be interested in a Rad too, thinking back on when i removed mine, it was pretty mangled, almost looked like someone took a gun to it, then gummed it full of epoxy to stop it leaking again, Ill have a think and a look into my budget for the car before i say yay or nay though
v8_mopar,
May 5, 8:01pm
Got me a 94 xr6 10 months back and am very happy with gas consumption. Can get to dunedin and back to christurch on a full tank if I grandad it. Thats about 720k's on 65litres :)
ginga4lyfe,
May 6, 8:13pm
Hey V8 Mopar, Do you have any Accelerator cables in really good condition! I was driving my Triumph today and some prick drove through a red light while i was going through so i punched the accelerator and only JUST got outa the way but also broke its current cable , I jimmyed the accelerator up to hold 3k rpms and drove it home like that, My day has been really annoying since then.
ginga4lyfe,
Jan 21, 9:49am
Never mind! I managed to buy a cable from a bike shop and modify it to my exact needs, all for less than 6 bucks and it works PERFECTLY :)
Since the public registrations are closed, you must have an invite from a current member to be able to register and post in this thread.
Have an account? Login here.