What projects have you got going on

Page 2 / 3
welshdude, Feb 11, 6:54pm
'02 Mondeo needs to be registered.

twit7, Feb 11, 6:58pm
iam doing a 68 ve valiant as a stright axle gasser ,318 tunnel ram twin fours and a manul box .also making it a two door sedan ,done one side looks good so far .

fordcrzy, Feb 11, 7:00pm
a friend of mine back in '95 nearly bought an LJ gtr (may have been a replica) for about $12Khe also looked at a REALLY REALLY nice rx3 for $9000.he bought a CRX instead.dumbass.

welshdude, Feb 11, 7:04pm
Might put a working stereo in it. Change the coolant next year.

bazza102, Feb 11, 8:07pm
bj8 austin healey. mtor and trim done guards and doors ready to paint plus about another million jobs. datsun 1200 getting a modded1500 motor and 5 speed. engine bay painted and re assembled. just bottom half to paint. xy falcon with all gt stuff. not started. datsun sss 1200 owned or 25yrs plus. just needs minor reassembly after minor crash at manefield. jet ski motor on floor waiting for a boat build. the ply is cut. 6 barrell 3.6x2.4 raft to cruise the worlds filthest river. minor cosmetics needed. over night or 3day drifts. 0800rafting

a18a, Feb 11, 9:08pm
Sweet. What's wrong with the current stereo!

pollymay, Feb 11, 9:50pm
Rx7 with a V8, about 350 or so hp just for messing round
84 mr2 with a 2L celica motor, subaru turbo and an ecu I soldered up in my bedroom that I run from my laptop.
92 Prelude with a big turbo on low boost that I just got running today. About 300hp or so.
88 mr2 that I'm putting a turbo 3 litre V6 into, can't decide between a cheap twin turbo setup or a big single.
84 mr2 with a levin 20 valve I have to fix, it's not charging and a CEL on dash
90 mr2 I am putting a 3L V6 in
Putting a front bumper on my 91 V6 mr2 and going to fibreglass and paint soon.
92 turbo mr2 that I'm finishing a wire tuck on.

I am king mr2, bow down to me.

ginga4lyfe, Feb 11, 10:14pm
NEVARRR! I like MR2's they go alright, I wouldnt mind getting my old MR2 back , but if i do get a mr2 ever again, it needs to be manual.

Otherwise my project this year will be fixing up My triumph 2500tc, andmy question about it would be, is there any known ideal gearbox replacements! I wouldnt mind being able to bolt up a supra 5 speed box to it instead of that floppy old one that iv just bolted back in, mind you, since im doing that i may aswell find a better engine to transplant into the triumph, gunna sound like sacralidge and overkill, but i wouldnt mind a 1jz and box bolted into it, with ITB's is should sound quite nice while pulling the smirks off of numbnut BR's on the track( if i ever goto the track )

pollymay, Feb 11, 10:31pm
Mine are all manual, next weekend is the first big thrash for the mk1.5. Can't wait.

townie55, Feb 12, 3:49am
1965 K code Fastback, pulled apart and dipped, and put into corner of garage with no further work done.That was 28 years ago.

falcon15, Feb 12, 8:41am
I just finished my suzuki samurai that i put a lexus v8 into

tim8069, Feb 12, 8:49am
Geese that Suzuki would have been a tight fit!
I'm doing 1981 Toyota Crown super saloon sleeper, chrome bumper pilarless model, Lexus V8, de-loomed, reworked interior, keeping the fridge on the rear parcel tray, looking for Reclining rear seats. Motor is in and driving.
Looking to keep it original looking on original wheels, no airbag suspension lol.

ginga4lyfe, Feb 12, 9:32am
you got a LONG way to go on that yet! ( it took me a while to get what you mean admittedly )

falcon15, Feb 12, 10:22am
The motor fitted in the engine bay ok nothing else did though. Radiator is now on the back tray, brake master cylinders are under the dash and not much of the factory trans tunnel is left. Was definatly worth it though. I would put pictures up if i knew how

absolutelyfunky, Feb 12, 10:34am
Mazda 808 with a 13b pp, 51mm Weber IDA. Mostly all done just need indicators wired and speedo cable fixed to get ready for a cert

elvis58, Feb 12, 10:51am
74 1303 beetle, body off at this stage, another floor etc waiting to be reassembled and chasing a 74 vj ranger that's been sitting parked up for years, fingers crossed.

myrns, Feb 12, 12:04pm
Restoring a '85 low Km yamahafz750,'04 FZ6 streetfighter project , '90 fzr 400 3tj with '94 yzf 600 motor, '98 R1 with rego on hold looking out for another engine, '95 trx 850 trackbike

socram, Feb 12, 2:18pm
Well done falcon15!You managed it!

Just installed the glass, made up a quarterlight and hung the last of the 4 doors.

townie55, Feb 12, 4:21pm
Photos!Pretty please.

vag.central, Feb 12, 4:43pm
Audi 80 quattro, fitting a 4.2 32v v8 from an a8 in, along with porsche brakes and kw coilovers

socram, Feb 12, 5:40pm
You'll have to check out my website townie.Email me if you can't remember it.

bigfatmat1, Feb 12, 6:38pm
Ya forgot to cut the ends off the cable ties always looks nicer if they are round the same way lol and not blue.

socram, Feb 12, 8:48pm
That pic is about two years old!Things have progressed a fair bit since then - but well spotted anyway!The HT leads still have the original yellow stickers on too.

I use blue or red ties to remind me that there is still work to be done. By the way, it isn't a show car either. Dash wiring cable ties are coloured though - but for a good reason.

i-n-horz, Feb 12, 9:03pm
Me old 86 Softail customs on the table for mods nothing to deprive the kids of their meal just a little cosmetics since I can't afford to actually ride the fcuk'n thing.

pandai, Feb 12, 9:24pm
Nice!