Hi got a trutest need to find a rear sprocket can someone let me know where the best place to go cheers
xxxrapidfirexxx,
Jan 31, 3:52pm
A 95 Dc2 integra b18c forged pistons n rods big intercooler, big turbo GT3540,450cc injectors.Thats the only parts at the moment, work in progress.
johnf_456,
Jan 31, 4:24pm
A 3rd Gen Chevrolet Camaro, have stripped it so far and had it painted just deciding what config to run engine wise at the moment.
mugenb20b,
Jan 31, 4:32pm
One year later.
mugenb20b,
Jan 31, 4:33pm
V8 diesel.
johnf_456,
Jan 31, 4:42pm
Sure sure, just why why why
mugenb20b,
Jan 31, 4:49pm
I don't know, how about a V6 common rail turbo diesel!
johnf_456,
Jan 31, 4:51pm
mm something to think about, the more I think about it the more I confuse myself. It had a 305 in it before the previous owner cooked that one so can't be bothered fixing that up.
foxdonut,
Jan 31, 5:30pm
This year I plan to get a run out old Hiace and spend 40 grand on it, before listing it for 17k or "swapz".
cabrio1,
Jan 31, 6:39pm
Wil you swap for bike with no engine, goes well.
rayzor14,
Jan 31, 6:42pm
Hmmm, what have I got going on. Two 1990 300ZX twin turbo coupes. Both short wheel base with factory manual options. Will be keeping one and onselling the other as an unfinished project. A late '90s Kawasaki 750cc Jetski - almost finished rebuild and then will be sold. Also continuing to expand my own business interests so not a lot of spare time.
khar123,
Jan 31, 7:17pm
Going to have a go and repaint the interior panels and trims in my 1992 XR8. Found great advice from inovative coatings in Silverdale Auckland. Will keep you updated on my painting skills
A 1984 Gpz 250, The little sister of the 305. One 80s mistake I am trying to restore for a bit of a laugh
ryans,
Jan 31, 10:04pm
1979 Ford Fairmont XC. 302 Cleveland V8 with 3 speed C4. Just installed new rear suspension (King Springs, Koni shocks) just received new (second hand) drums, so on Saturday will replace the rear wheel cylinders (one is leaking) and redo the flares I made on the brake line I made. Then I need to change the front lower ball joint, then a couple of very minor repairs (refit the number plate light, put the rubber back on the brake pedal) and I should have her WOFed, after almost 3 years of working on her.
I need to buy a good air compressor next, so I can sandblast her and give her a paint job. I'm not after a show car, so this will do for now.
rojakell,
Feb 1, 11:21am
Mazda RX7 getting LOTS of custom steel work (not rust related), Honda XR600R getting more power Hyosung 50cc Quad getting more power Trolley Derby car, recently bought, getting a tidy up for racing.
bubbles52,
Feb 11, 4:36pm
mine - lj torana with 265 hemi and triple 45mm webbers, 90% complete
twink19,
Feb 11, 4:39pm
that souds good, is show or race. mine, nearly finishedshell sport race car, just waiting on engine, hasnt been used since 1983
mopar63,
Feb 11, 4:42pm
an AMC Javelin getting a new motorand '69 AMX that will be getting a major as it's been stripped and sandblasted so will have some fun putting it back together, plus have gone 1/2's in a AP5 Val so will be busy this year
bubbles52,
Feb 11, 4:42pm
building just for driving in the weekends and maybe the odd 1/4 mile, just needs painting and bigger brakes then complete, been doing it last 5 years when i have free time
jason18,
Feb 11, 5:11pm
71 vg valiant. Just been painted
socram,
Feb 11, 5:21pm
1956 Brit 1500cc saloon, but now with Rover V8, 4 wheel discs, 5 speed Toyota box, burr walut dash, Racetech seats, all new electrics, empty wallet. 6.8 years so far.
woody1946,
Feb 11, 6:20pm
A back fence Ha Ha Ha
disney,
Feb 11, 6:53pm
78vette needs painting now
Since the public registrations are closed, you must have an invite from a current member to be able to register and post in this thread.
Have an account? Login here.