Hi is my engine interferance and does damage if belt breaks! thanks
antwerp87,
Jun 11, 7:08am
Ok for starters yes it is a Honda Block. Head is different in the Rover. Its a higher compression twin cam head. Yes the rover engine will bend valves. You will have bad luck if it bends valves in the F20A motor. Its from the older 1989 -1992 series and in MOST cases it wont bend the valves. If it does I can garuntee you you can get another head from a wreckers. There are alot of those cars around so you will be able to find something dam cheap. New Water pump, idler pulleys and cam belt and head gasket bolt her on and ya ready to go for a pretty cheap job and plaining the head just in case. All done in a day. Hope this helps. All going well you should be fine.
laneyjan,
Jun 11, 11:06pm
HI ANTWERP my car is a CB 1993 Honda with the F20a 5 engine .is this interferance as I read the Rover thread and so am asking .thanks
antwerp87,
Jun 2, 6:10pm
No its not. its non Interferance. So MOST of the time you wont have an issue. You should be fine.
Since the public registrations are closed, you must have an invite from a current member to be able to register and post in this thread.
Have an account? Login here.