I took the car for compliance last week, and failed on excessive play in the rear wheels - no worries I thought, will probably just be a suspension joint each side .
Unfortunately I didn't realise I actually had a 4WS Model! And the play is coming from the inner rack end/joint on both sides . so before I start pulling it all apart, does anyone know if these can be tightened like some of the older racks! Or will I need to get a couple new joints/replacement rack!
Cheers
Since the public registrations are closed, you must have an invite from a current member to be able to register and post in this thread.
Have an account? Login here.