the idea would be to build the trailer so it rests level, so slightly forward of the center to compensate for the draw bar, then just place the load on the trailer slightly forward of center.
or is that to much planning and drawing of diagrams.
martin11,
May 13, 3:39pm
A Stupid driver well overloaded Probably not able to stop in the distance required by the laws
martin11,
May 13, 3:40pm
Far to much on the drawbar
sr2,
May 13, 4:21pm
According to an engineer from a caravan manufacturer, 6 to 8% of the gross loaded trailer weight on the tow bar is the industry standard.
paul861,
May 13, 4:44pm
kea are professionals. they make an extremely good product. 100mm = 4" i say again half an inch back for every foot of deck, this includes tandum
axeman.,
May 15, 3:19am
my dad is 1" to the rear of the centre, looks like i will go that way
tshop,
May 15, 3:31am
It looks that way,,
Since the public registrations are closed, you must have an invite from a current member to be able to register and post in this thread.
Have an account? Login here.