Im painting front front forks on my PE175 , they were sprayed black but they should be yellow , have sanded back to the bare aluminium , whats my next move ! Primer then paint ! Whats good for aluminium forks !
gunhand,
Sep 12, 1:41am
You need an etch for alloy or a etch and primerin one (suitable for alloy) then sand and paint as normal.
bevharris1938,
Sep 12, 4:03am
so you spray the etch primer on and sand it off
rob_man,
Sep 12, 4:10am
No, you spray the etch and paint straight over it. A pity you sanded all the black off because it was most likely etch primed underneath and would have served quite nicely as a substrate.
bevharris1938,
Oct 22, 5:12am
Etch primed the forks today , turns out i left some black paint on the forks and the etch reacted with it , so it put some paint stripper on it , then recoated in etch 3 times. Painting them tomorrow.
Since the public registrations are closed, you must have an invite from a current member to be able to register and post in this thread.
Have an account? Login here.