Clutch slave cylinder / thrust bearing ceased

Page 6 / 19
tiggles2, Nov 3, 5:48am
ClaytonRoad - lol lived up Moutain Road for first few years here
Had to stop and think for a minute - who I actually do know and that yes they can help and its ok to ask - I work off a gentleman's handshake - and no I am not that old LMAO - well known for being feisty when have all the bullets loaded.
When I feel bullied its because I can't make sense of what is being done - gawd help those when I do figure it out - I do have balls - no due respect required
I go and get my hay out that way - was supposed to go out last weekend and see a mate who just had back surgery
I get the hint - will wander out and have a yarn

snoopy221, Nov 3, 5:51am
JMMA BACK THIS lady UP-K

GAUNTLET WAS LAID DOWN.
Q! is simple are you prepared to state your qaulifications and stand by your posts!
I AM Beyond Any Doubt.
SQUEAK!
Man Or Mouse!
Anyminity is respective.
Gawd meeeswaiir 45! come in ere and ya'll have a snoop.
Lyk U hv noidea boot.

tiggles2, Nov 3, 5:53am
Lol jimma - its a small world sometimes - and yes will post update
Snoopy - I am well **** off that I have been treated this way - but life has taught me to follow due process, get ya facts right and then go for it. A good outcome would be excellent - will have to fight for it - how do I know that - because to dated i have done all the chasing despite the promise-of returned calls. and there is the accent to the voice - it is not one that admits to wrong if you follow

snoopy221, Nov 3, 5:55am
Hint is simple talk ta merv-talk ta nev.
dat simpl.
otherwise.and this'll be a larffff talk 2 PAT

tiggles2, Nov 3, 5:57am
Will talk to the lads ;p

snoopy221, Nov 3, 5:59am
Tiggles2
We are essentialy here to help=
However it can move over to other agendas,,
In YOUR CASE IT DOES.
Ya bn shyt on
OR ALL MY YEARS AND QUALIFICATIONS AIN'T WF SHYT!
U GUNNA TL MOI MOI IS WNG!
\PST BK K

jmma, Nov 3, 6:00am
Done my time in the 70's at GM dealership, trade cert, last job in automotive was Foreman at Toyota dealership in 97. Worked on everything else in between including BMC.
Yes, I'm with you on this one snoopy, only wish I was up that way to go and back up tiggles on Monday.
I don't like this B S either.

tiggles2, Nov 3, 6:06am
I get that snoopy - No you are not wrong in any way shape or form when logic is applied with the correct knowledge
I am just so dam p###ed off with the situation now as having realized yes good people here to help and you have - BUT the B/S and stuff is really grinding me. Being lied to, made to feel bullied and stuipid (yeah can argue I allowed it and yeah I did because I did not know - thats taking advantage = bullying - don't like that)
I play the telephone convos over in my head and the patronizing ***** but I can't let that prevent me from being the bigger person and doing things the right way
He is going to ring me (so he says) Monday

snoopy221, Nov 3, 6:08am
Personal thank you jmma
Bottom line is B/S Espescialy in this situation is not good
Mechanics are simple they deal in facts.

Personal Garauntee OP is that zeph nz tools gadgit.
mmmkay.
This thread could be EASILY changed to affidavits.
right is riight and wrong is wrong

tiggles2, Nov 3, 6:14am
Thank you jmma :) - that's some record.
No joy Monday its a personal visit down to Taupo Tuesday. I maybe a little female but I am standing my ground.
I will talk to the lads before hand and if can get someone to have a look at truck - not take apart but look at what appears new and what not am happy to pay for that - the slave is new with nice shinny in ya face bolts.
Even new bolts on the drive shaft (4) - have no idea why
Will have a nose around and see who is at the Roto yard - as in management.
I don't stand for B/s in the horse world and am not going to start in any other area

jmma, Nov 3, 6:16am
When I was Foreman, no lady left the reception until they were clear on what was done to their car, I always felt that when they had a car panel and painted, they could see where their money went. As some services could be $400 to $500, and their car looked much the same, I always wanted them to be aware of where their money went. Men thought they knew it all anyway.

In tiggles case, I would have explain the gear selectors to her, so she would understand how they worked and why they stopped working, But then I would have to learn how to sling the B S for the second visit aye (o:

tiggles2, Nov 3, 6:17am
Have printed it out and print screen it
Print screen copies are better than cut n paste
Not sure what to say to everyone now ex thank you

snoopy221, Nov 3, 6:18am
Right hot coffe.
AND Big Huggies and CUDDLES

Now settltle down K Gurl.
WE IN DIS 4 DA LNG HAUL-K

Welcome toTM Motoring boreddddddddddd-LOL

tiggles2, Nov 3, 6:24am
Thank you jmma - to be honest when I have had a vehicle in for work/ servicing/ panel work (horse sat on my crewman and bum dented it) they have always explained it well and the replaced parts have been either offered or left on the floor in front of ute.
In this case no real explanation of gear box damage other than they had to make and build parts as not available in NZ was given. I understand the make up of arms and selectors - connecting arms to the stick but did not fully understand how a clutch works, the job of the master or slave cylinder or what could damage what, and more to the point what would not damage what
Even looking at the drawing he made on the invoice it does not make it logical.

snoopy221, Nov 3, 6:26am
Yr post#125 is AGAIN
*SMAKS DIS WMNZ UPSIDE DA HD* don't stand for B/s in the horse world and am not going to start in any other area

SHYTE Tis Motorn.
Yas Fgvn.

jmma, Nov 3, 6:26am
Yep coffee for me tooo
One other thing tiggles, I know we haven't seen the truck. That is why we asked all the questions, thats how you diagnose things and I am comfortable with the explanations we have come up with.
Hugs here as well (o:

tiggles2, Nov 3, 6:28am
Coffee - sounds good jugs on and *** cat wants more food.
Huggies and cuddles - you sure you have not been on the horse circuit. (you just add wine or bourbon and chocolate to the equation)
Yup long haul - I know its a road
Loving the TM Motoring board lol - its not full of b!tche$ like the animal or parent ones.
Being cynical now ;p

jmma, Nov 3, 6:31am
Horse said to the truck " That thing underneath is forked " haha

tiggles2, Nov 3, 6:34am
Hugs back jmma
accepts slaps up side the nut ;-PI know
I understand why all the questions and have answered as best i can with as much detail as can in a language that you guy appear to understand.
Am happy for any one to see truck any time - am all over the country at different times - hmm actually if it ever breaks down again on a trip I have net access I should start a SOS thread - probably get faster & honest service - food for thought

tiggles2, Nov 3, 6:35am
lol - think my horses said a tad more LMAO jmma - ;p

snoopy221, Nov 3, 6:46am
Got anything on 2dy dt ya cnt pt off!

tiggles2, Nov 3, 6:55am
Today as it is now - oops - is my catch up, clean up, book work, general get my act together day. Don't get many and they always disappear very fast.
So in reality - will probably do a lot of not a lot

snoopy221, Nov 3, 7:02am
five hiurs away on two seven204six oh one ohh rd

GAWD SHE'S A Hrd lyf

tiggles2, Nov 3, 7:11am
Five hours - hmm - did I mention (probably not) I am geographically challenged - LMAO
I take *long* cuts and have perfected the art of *U-Turns* ) - the Sat-Nav and I really do not like each other
Need sleep - before I see what the day brings

snoopy221, Nov 3, 7:14am
02742046010