motorcycle tag
| Topic | Replies | Last post |
|---|---|---|
|
Vintage/Classic Motorcycle registration cost Looking at purchasing a 1972 Triumph motorcycle 500cc, would anyone know the cost to register this please!Is there a special rate for vintage/classic motorcycles!Many thanks. |
4 | |
|
Motorcycle engine paint options Ok, I've got a wee project to restore for when the kids are old enough to ride (an old Honda so most parts available). I'll prob get the frame powder coated black for durability, but am wondering about the best options for both stripping and paint... |
23 | |
|
MOTORCYCLE RIDERS hi guys! any one getting out on the road this weekend! i need some riding m8s too! im in the naki and just started with road biking,so any one up for a blast! |
42 | |
|
Motorcycle clutch help. So i've got alittle '88 Honda CD250 and lately the clutch has been a little problematic. I bought it about 8 months ago with dead reg' & 23,XXX miles on it. It runs like a typical little Honda motor does, complete bast*rd when cold but as ... |
15 | |
|
New motorcycle/moped laws ! Seems these changes were proposed back in 2008, not sure what stage its at in parliament though.http://www.nzta.govt.nz/consultation/driver-licensing-amendment-2011/docs/q-and-a.pdf -Removal of the 70km open road speed limit for learner and restricted cla... |
3 | |
|
WOF inspector people. motorcycle question I have a bike which appears to have a twist in the front end, it's not totally obvious until you put it on the center stand and stand back a foot or two looking down the center line, then it really jumps out at you.Imagine a giant grabbed the headstoc... |
15 | |
|
How can you list a Motorcycle How can you list a motorcycle for sale with only 1km on the clock i have tried but it keeps telling me it has to be over 999 any help would be much appreciated Thanks |
7 | |
|
Motorcycle touring Europe Going to Europe this winter(nz) to tour on a motorcycle.Does anyone know how much insurance is. Want to buy BMW there. |
2 | |
|
Do (new) motorcycle dealers barter ?. I'm kinda keen on the new Triumph Bonnies, but when I do the comparisons between what we pay here and in other countries (taking into account GST and exchange rates) they seem a bit overpriced. I notice ChCh dealers throwing in things like a free leat... |
6 | |
|
Motorcycle Finance Can you apply for motor cycle finance without a motor cycle licence!.I want to but a bike for a present but dont have the licence. |
22 | |
|
Favourite Motorcycle If you could walk into a shop tomorrow and buy whatever motorcycle you wanted, what would it be. Must ne a new bike and be available. For me, I reckon I would buy a Triumph Bonneville. Quite like the look of those babies. |
66 | |
|
Cost to paint motorcycle mudguards Anyone know how much $$$ I would be looking at to get a couple of old motorcycle mudguards painted!Just need them done in black. |
8 | |
|
Motorcycle parking Are motorcycles allowed to park on footpath as long as they do not impede pedestrian traffic!.Like other countries around the world! |
23 | |
|
Plugging motorcycle valve? Hi guys, i am wanting to carry out this on my ninja due to too much popping and banging on deceleration.But i need these little plastic caps to do the job properly. any idea of where i can find these!http://asianconnection71.com/0728PAIRValve1.jpg iv had ... |
13 | |
|
Manual motorcycle static Timing Help Hope someone can help me with this. I've just bought an early twin cylinder bike which has no timing marks on the flywheel. However the manual says "Max timing 35 degree BTDC,Initial Fixed 5 degrees BTDC. It has a bore 84mm and stroke 58mm. It ha... |
6 | |
|
Triumph Bonneville Motorcycle Question So if the late 1970s and early 1980s Bonnys have electronic ignition which is either located behind the sidecover or under the seat, what is under the old points cover! |
4 | |
|
Motorcycle service technician - Where to study? Hi Everyone! Does anyone recommends a school to study to become a motorcycle service technician! |
1 | |
|
Suzuki motorcycle b120 just got this basket case bike / want to find out what year it is. frame no 353021 engine no b100-378921 . any help welcome . |
4 | |
|
Motorcycle wheel respoking in auckland does anyone know anyone that can respoke some rims i have had powdercoated recently.i have had the old spokes cleaned and re chromed. but putting the 2 together is like a chinese puzzle .need them to be balanced and trued.cheers |
9 | |
|
Motorcycle hard to start after running Air leak between the carb & head! What model & cc! |
4 | |
|
Motorcycle Handlebars Just wondering if anyone can point me in the direction of who makes motorcycles handlebars in NZ or who sells second hand Harley parts in NZ.Thanks in advance |
19 | |
|
Locking motorcycle throttle twist grip! Folks, I am looking for a twin cable, motorcycle twist grip that I can adjust for friction. It is for a 21mm bar. It isn't for a bike, but I need to be able to take my hand off the throttle (which will have tension on it) and have the throttle stay in... |
19 | |
|
Is this BMW motorcycle worth $1000! 1983 99000 miles, deregd goes well but has charging problem and need battery I'm tempted http://images.trademe.co.nz/photoserver/47/160603447_full.jpg |
4 | |
|
Motorcycle Racing Club - Track Racing Contact the invercargill MC clubs, they put together the Burt Munro weekends. Ask any bike shop who to get hold of. I cant remember his name at the mo but 5mins on the phone will find out if you ring them. Also MCR in Dunedin would know as well or D |
3 | |
|
Charity motorcycle ride was mentioned to me that the westpac rescue chopper ride was on tomorrow! haven't been able to find out if it is for sure, anyone know!.leaving papakura bloodstocks. thanks |
3 | |
|
Rebels motorcycle club now in NZ Cool, I am looking for a club to join. Im sure ill be accepted on my Suzuki as they are after all "just a motorcycle enthusists club" Where do I sign up I wonder! |
36 | |
|
Very nice adventure Motorcycle skills https://www.youtube.com/watch?v=eDxBGc9TD4c Worth a look to see a larger bike ridden like a Trials bike |
16 | |
|
Selling a motorcycle. I have an early Ducati Monster 750 I am thinking of putting up for sale. Is it practical to sell it without allowing test rides? I am aware of my vulnerability to theft or someone dropping it during the test. I was wondering if asking for a de |
16 | |
|
Motorcycle certifier , South Island Can any1 recommend some1 . NZTA site where it did say they had a list comes up as page not found . Seem to be plenty of car certifier's but bugger all for motorcycles . NZTA site says to expect delays taking calls or getting reply's . I have an idea , why... |
13 | |
|
Looking for a good Motorcycle Engineering Shop Hi - I have a motorcycle cylinder head with leaking valves (SuZuki DR650). Can anyone recommend a place in Auckland that could repair this at a reasonable $$? Thanks. |
17 | |
|
Motorcycle accident stats. NZ Herald today. "The NZTA data, provided by the crash analysis system (CAS), found the rider was likely to have primary responsibility in 73 per cent of the deadly motorcycle crashes between 2015 and 2019". Have to say as a motorc |
34 | |
|
Motorcycle Carb's - Round Slide Vs Flat Slide Got a LS650 Savage project but have had a hard time getting it to run right It's 666cc with 10.5 to 1 but my jetting sessions is pissing the missus off lol'. When it was stock it ran smooth with a 250cc round slide but I was merely testing. After that a f... |
14 | |
|
2 stroke motorcycle tuners - Auckland Can anyone recommend any two stroke bike Tuners in Auckland ? |
5 | |
|
Motorcycle Riding Just been riding around the top of the south and noticed that quite a few riders wave which is good. Also noticed there are a few who just ignore a friendly wave. Guess they are novices and need to hold on for dear life to the bars. No matter what you rid... |
48 | |
|
I need a price to ship a motorcycle from Auck to P Are there any specialist motorcycle shipping companies? I want to ship my motorcycle to Perth from Auckland and then back here again after about 10 weeks. |
4 | |
|
Indian 500 Motorcycle Piston Barrell needed! help! Hi all, In need of a front cylinder barrel, gudgeon pin has walked out and scored bore. Needed for a wedding next weekend, so if anyone has any leads would be much appreciated! |
22 | |
|
How to sell a motorcycle http://www.trademe.co.nz/Browse/Listing.aspx?id=848553206&open_homes=®ion=&district= Awesome people skills. |
4 | |
|
Motorcycle tyres If your Auckland cycle treads without doubt. Check website to see what hey have and buy good name brand tyres. I never skimp on my bike tyres they are way too important. They have Bridgestone Battlax S20 - Sport Road Tyre in your size on special. Pe |
2 | |
|
Motorcycle Head Light bulbs? Have started to notice the darker mornings. My bike has a standard H4 60/55W headlight bulb but drivers seem to struggle to see me. Just about been cleaned up twice on the way to work in the last two weeks. Just passed a testing station WOF so headlight i... |
23 | |
|
Best value motorcycle transporter. Anybody have experience of shipping a motorcycle from one provincial town to another in the other island? Is there any online site to check out prices etc? |
7 | |
|
Rainex on Motorcycle visors? Off to the South Island on Saturday for a week. Forecast shows it will be wet for part of the week. Has anyone tried Rainex on their helmet visor? Not even sure if it is okay to apply to visor plastic? |
24 | |
|
Wiring accessories on motorcycle I have a bike specific twin air horn already using a relay and a fused wire from battery. Now I have heated grip and a heated vest to add. Rather than run more wires I'm thinking of one good thick wire from battery. Take first live off it for the vest bef... |
5 | |
|
Corrosion in motorcycle ignition Turn key clockwise and it lights up but then goes off as key reaches maximum rotation. Little bit of fiddling with the key and the electrics stay on but key has to be left not at full turn, if you see what I mean. It's like there's a connection point that... |
7 | |
|
Motorcycle mechanic west Akld? Any one know of a good one? appreciate any feed back, bike is a motorcross honda xr . thanks |
3 | |
|
MOTORCYCLE GLOVES Opinions please. which or what would you recommend [ not electric ] I've tried many brands over the years,still my hands freeze |
4 | |
|
MOTORCYCLE GLOVES Opinions please. which or what would you recommend [ not electric ] I've tried many brands over the years,still my hands freeze |
31 | |
|
Recommendations for kids motorcycle clothing . Road bike gear for a 10 year old required . My 10 year old son has seen the light and is enjoying coming for a ride so i want to get some better gear for him . Can any1 recommend a online shop . |
21 | |
|
Motorcycle finance? Hey looking to finance a hornet 600 that's not LAMS approved, but I'm getting my licence this week. I'm curious if you can still finance a non LAMS bike on your learners? Thanks |
14 | |
|
"Whats The Best Motorcycle Radar Detector" ? Currently i have the TPX.2.0 detector. When its going is does the business,however, the plug into the detector is very fragile , and i am now on the third wiring set. Any suggestions? Anybody ? |
1 | |
|
"Whats The Best Motorcycle Radar Detector" ? Currently i have the TPX.2.0 detector. When its going is does the business,however, the plug into the detector is very fragile , and i am now on the third wiring set. Any suggestions? Anybody ? |
7 | |
|
Motorcycle Freighters. Any recommends? Hi. Looking for the best godam Motorcyle delivery specialist in NZ. Tell me who is THE one to shift my ol beasty from Timaru to Auckland? Cheers ! |
12 | |
|
Any suggestions for what to use under a motorcycle centrestand in a garage. Bunnings have a selection of mats around 14m thick. There is an interlocking one which will protect the painted floor from when it rocks on and off the stand. HAs anyone tried anything else? |
14 | |
|
Motorcycle steel rim straightening Chch Anyone know of a person or business in Chch that could cold straighten a motorcycle rim? Not so much as buckled but has the rims edge dinged up a bit,tyre is still holding pressure though. Cheers for any feedback. |
5 | |
|
Motorcycle Cruise Labour Weekend 2015 If weather is going to be awesome over the Labour weekend myself and a mate are cruising from Auckland to New Plymouth, Wanganui, Taupo, Rotorua then back to Auckland leaving Friday 23rd October. If youd like to join us your more than welcome. Any bike, a... |
12 | |
|
Beware Motorcycle Imports Direct in Christchurch I recently bought a bike from Costa who initially was very quick and helpful with emails when I was inquiring about purchasing. Once I had bought and received a bike via shipping to Auckland I found faults with the suspension that should have been discove... |
18 | |
|
Commute by motorcycle/moped/scooter in Dunedin? The Motorcycle Safety Advisory Council (MSAC) are running a project that looks at how to make commuting by motorcycle, moped and scooter safer in Dunedin. They want to know more about this from the point of view of the riders, so if you commute using one ... |
2 | |
|
ABS Plastic Welding at home ( Motorcycle Fairings Check out this youtube video on repairing ABS type plastics. I have unsuccessfully tried nearly every glue known to man on bike fairings. Some seem to work for a while before either cracking or breaking again. Even resin and glass mat doesn't seem to want... |
3 | |
|
Motorcycle how long can you leave petrol in tank before no good and if no god whats quickest way to empty had petrol in tank for 12 months as not used bike |
7 | |
|
Motorcycle Shocks question. I was thinking about lowering the back of my motor bike to give a bit more "bobber style" look. Can I just remove rear shocks and replace them with shorter metal brackets ! I know this will lower it and make for a very hard ride.but my question ... |
30 | |
|
Motorcycle headlight law, who knows what the requirements are for a 1984 model first reg'd in nz in sepember 2008, with regard to the full time headlight running!(its not a moped or scooter, its a proper fullsize motorbike. Any accurate answers much appreciated, thanks a lot. |
29 | |
|
STOLEN - RACE MOTORCYCLE BMW S1000RR (white) In the early hours of the morning of March 2nd, this BMW S1000RR race bike was stolen from Waikanae. Nearly every piece of this machine is computer coded and traced, so as soon as it goes near a shop, you??™re gonna be caught. It is a highly modified ra... |
7 | |
|
Motorcycle racing Paeroa this Sunday The bikes are back on the streets of Paeroa this Sunday.Entertainment at arms length at 100mph - actually at 265kph. For the 22nd year. |
3 | |
|
I want to buy a motorcycle Should I shop here! http://www.xtranormal.com/watch/13108527/the-motorcycle-trade |
11 | |
|
Motorcycle WoF question. On the controls on my bike it has little stickers (factory) for horn, lights and turn. My question is do the switches HAVE to be labled for a WoF! I want to paint the switch blocks (they're faded & crappy lookin') but worried if WoF inspector ... |
10 | |
|
Motorcycle forks where do I get 39mm tube from to make some fork legs utilising the standard trees ! any info would be of help. Cheers |
10 | |
|
Motorcycle Helmet. ICON Variant. I've been looking at these does anyone have one that could give any advise on the sizing as there is no place to go in NZ to try one. I have a 58.5cm head which is a large in an ICON, and my Shoei is a large yet I have read and viewed vids that say th... |
6 | |
|
Honda motorcycle quality I used to be a honda motorcycle mechanic many years ago and they used to be pretty good quality where other brands where a bit rough I saw the latest little 125 farm bike and I have seen chinese bikes with better made and I have been told the quad bikes a... |
9 | |
|
Motorcycle ad (?) Good for a laugh - there's a series of them. http://www.youtube.com/watch!annotation_id=annotation_780213&feature=iv&src_vid=l7Jt-LFs6xE&v=2kJxXi5xvDY |
2 | |
|
Motorcycle tyres why are they so damned expensive compared to car tyres! |
7 | |
|
Motorcycle tyre advice I am due for a replacement set of tyres on a 98 1200 Bandit. I quite like the look of the new dual compound type tyres with harder compound centres and softer compound shoulders. My problem is that I am a rather heavy counter steerer and as a result I see... |
9 | |
|
Pocket motorcycle.or monkey motor bike Their has been one riding around on the road.I saw pc plod he was in traffic group.I asked can these bikes be registered.I said I am surprised to hear that as I did not think they would meet nz standards in oz ADR.he said oh know it all depends on cc.whic... |
14 | |
|
Motorcycle Trials Hey all,Im trying to find a 50cc Mini Trials bike,There isn't many in NZ so its a bit of a struggle,i ride trials and my 6yr old is writing letters to santa and begging for a trials bike.if ya have one or know some one who has one,drop me a line pleas... |
4 | |
|
Motorcycle gear lever side So the Poms had to change sides to suit the usa market.Who before them was doing gear lever on the left that the Poms had to comply with! Or did the yanks just decide if the poms were on the right, then they would go for the left side. Or were HD doing le... |
23 | |
|
Insurance question. Hi all hope you can give me some thoughts lets say a person owns a motorcycle that barely if ever gets used Hi all, hope you can give me some thoughts. Lets say a person owns a motorcycle that barely, if ever gets used. the kms are kept very low, and they keep it because of its sentimental value. The want to keep it in a glass case in their lounge as a show pie... |
5 | |
|
Mobile motorcycle mechanic Does anyone know of a mobile bike mechanic in the canterbury area. Yes I have tried google, but only found one in Auckland. Thanks in advance |
3 | |
|
When is the Ashburton motorcycle show on? I know it sometime around the end of this month but not too sure if its labour weekend or after that! |
2 | |
|
Motorcycle Speedway Sponsorship Hi my name is Noel, my 16yr old son (Billy) races motorcycle speedway, we are despratlely looking for sponsors between $100- $5000. we have started our season with a bit of bad luck and hopfully there wont be anymore, our rebuilt engine blew up .it is in ... |
11 | |
|
Motorcycle as commute. Newbie Hi,I am thinking about getting m/bike as a fast/cheaper means of transport, but I have no idea about the pros and cons.I did ride when I was younger, and I did ride a motorbike across India a couple of years ago, so I do have some experience.but NZr's... |
31 | |
|
Motorcycle wreckers? Who wrecks big sports bikes! looking for 2 sets of throttle bodies (need 8) from a gsxr750/1000/1300 or similar |
16 | |
|
Sidecar fitting to motorcycle in auckland Does anyone know who can fit sidecars to motorcycles in auckland please! |
5 | |
|
No rear indicators with these fitted? (Motorcycle) Hiya all, quick question. If i fit these will i still have to have rear indicators. I notice on the Norton Electra they don't run rears. http://www.trademe.co.nz/Browse/Listing.aspx!id=505680402 |
8 | |
|
Are you allowed to carry a motorcycle helmet onto An airplane!Not sure Im keen on putting in the hold in the soft bag Im taking! Or would they think im a hijaka. |
18 | |
|
Motorcycle Freight? Who would you recommend for shipping a bike within NZ! Would appreciate an opinions whether good or bad on who you have used in the past:) Cheers. |
8 | |
|
Newest motorcycle purchase :) http://images.trademe.co.nz/photoserver/11/227016411_full.jpg Not the prettiest, but for some reason Ive got a real spot spot for it. A few weeks of TLC and it should be a good thing.I hope:) Was cheap enough anyway. Ah.nostalgia. |
18 | |
|
Motorcycle Importing Looking at buying a Harley in the USA and would like some advice on importing and the cost. I have imported a car from USA using Kiwi shipping and was happy with the outcome. (Compliance was a nightmare though. Any one imported a bike, what would it cost ... |
7 | |
|
Clicking noise front of motorcycle? Challange. A bit of a challange here.I had a 2000 Hayabusa that developed a rotating clicking noise in the front end but went away when front brakes were applied. I looked at it made sure things were tight etc etc but nothing obvious to me any way. During this time ... |
48 | |
|
Classic Motorcycle show. Anyone going/displaying? http://classicmotorcycleshow.co.nz/ I know a lot of you guys have old bikes & was wondering who's going or got something to display!Put a pic of your ride here if you like. Convince me I should go. PS. I have nothing to do with the show, lust a pa... |
3 | |
|
Revin for motorcycle, actual cost? Hey, I am looking into getting a motorcycle revinned, its a post 2000 sportsbike, if that makes any difference regarding brake tests. Im woondering if anyone can tell me the actual cost for the revin, not the rego part, just the cost for the revin check i... |
4 | |
|
Motorcycle brakes someone will know where can i obtain one of the17mm round plastic inspection discs that fits in the side of a motorcyle master cylinder whichismounted on the handle bars and is nissin brand.the bikes a1983 yamahaXV1000. thanks |
5 | |
|
Motorcycle License Howdy guys, I'm thinking of going for my motorcycle license, just wondering about the practical tests etc. Anyone done a Restricted tested recently! |
2 | |
|
BMW motorcycle seat issue http://www.courthousenews.com/2012/04/27/46030.htm This should be easy to avoid - just play Susan Boyle MP3s through your helmet sound system, or think of the Queen. |
2 | |
|
Big Dog Motorcycle side stand. Does anyone know where I can find a side stand to hold the bike up, it's a K9 Model. |
3 | |
|
Classic Motorcycle Rego Does anyone know how much it is to register a pre 1970 motorcycle, assuming it is currently registered what is the annual renewal cost! |
5 | |
|
Products to clean / polish Motorcycle Engine. Its all together and bare aluminium. It has some corrosion on it. I've used Autosol on the crankcases but they're still dull and its too hard to get into and around the bolts. Any products (I'm thinking acids!) for the hard to get at places li... |
18 | |
|
Motorcycle Jump Start Can you jumpstart a motorcycle(big block) from a car! |
5 | |
|
Motorcycle very high revving on startup I have just replaced the air filter on my 86 honda GL145 aswell as taking the carb off and giving it a good clean too. Now it only starts with the choke on and immediatle revs very high and loud, and the throttle makes no difference when operated! Any dir... |
19 | |
|
Motorcycle Footpeg Q I'm tempted to cut the footpeg brackets off my SR500. I'm very unlikely to ever want to double on it and they look pretty blah. I've been told by a compliance guy that I won't get through the VIN/WOF process because it'll have a seat b... |
32 | |
|
Why are motorcycle batterys so dear compared to there size to car one / you are paying the same price for a bike bat thats smaller than a packet of icecream . |
18 | |
|
Classic Motorcycle - vinned ? Hi - could someone please tell me the procedure and costs involved to have a 1972 motorcycle vinned.The frame number is still in the system apparently.Many thanks:) |
10 | |
|
After market motorcycle mufflers hi, has anyone had bought the carbon fibre or stainless motorcycle mufflers from WMS on trademe. they are chinese made and look okay. i cant seem to find any feedback on the seller regarding their quality. or otherwise. they just seem a tad cheap. hope so... |
4 |